You are here

Advanced Bluetooth Low Energy System Design + Energy Harvesting Design | Cypress Semiconductor

Advanced Bluetooth Low Energy System Design + Energy Harvesting Design

Workshop Sponsor: Glyn GmbH & Co KG

Workshop Date: April 7th, 2016

Workshop Address: Google Map Link

TU Graz, Institut für Hochfrequenztechnik

Inffeldgasse 12/451

Graz, Austria 8010

Workshop Start / End Time: 8:00am - 4:00pm

​Food Provided: Lunch, Soft Drinks & Coffee

Workshop Contact Person: Marco Jung

Workshop Overview:

PSoC® 4 Bluetooth Low Energy is an easy-to-use, Arm® Cortex™-M0 based, single-chip solution which integrates programmable analog front ends, programmable digital peripherals, CapSense® technology for touch-sensing, and a Bluetooth 4.2 LE (Low Energy) or Bluetooth Smart radio.

PRoC® Bluetooth Low Energy is an easy-to-use, ARM Cortex-M0 based, single-chip solution which integrates a Bluetooth 4.2 LE radio and Cypress’s CapSense technology for touch-sensing.

Cypress's Solar-Powered IoT Device Kit provides a complete, easy-to-use platform that can be used to design a solar-powered IoT Device with Bluetooth LE. The Energy Harvesting System (EHS) uses Cypress's new S6SE101A Energy Harvesting PMIC optimized for solar energy, and Bluetooth Low Energy connectivity is provided by Cypress's EZ-Bluetooth Low Energy PRoC Module. Firmware and application software to implement a Wireless Sensor Node (WSN) that transmits sensor data as a Bluetooth Low Energy Beacon is also included.

By the end of this workshop, you will:

Understand Cypress's Bluetooth Low Energy one-chip solutions including PSoC 4 Bluetooth Low Energy and PRoC Bluetooth Low Energy
Understand the Bluetooth Low Energy architecture
Learn how to use Cypress's Bluetooth Low Energy solutions and PSoC Creator to implement:

  • Understand Cypress’s Bluetooth Low Energy solutions
  • Learn how to use Cypress’s Bluetooth Low Energy solutions and PSoC Creator to implement:
    • Over-the-air (OTA) Firmware Upgrade
    • New Bluetooth 4.2 Features
    • Multi-Role Bluetooth Low Energy Design

Become familiar with Cypress’s Solar-Powered IoT Device Kit
Understand the architecture of a solar-powered Wireless Sensor Node (WSN)
Understand the architecture of an Energy Harvesting System (EHS)
Learn how to develop a solar-powered WSN with EHS by understanding:

  • How to measure the power delivered by an EHS
  • How to select EHS components
  • How to calculate the power required for the EHS Load
  • How to design and optimize an EHS

Create a Network of IoT Devices

Workshop Agenda

Time                   Topic
08:00 – 08:15     Welcome and Registration
08:15 – 08:30     Setup and Install Software
08:30 – 09:00     PSoC and Bluetooth Low Energy Terms
09:00 – 09:20     Cypress Bluetooth Low Energy Portfolio
09:20 – 09:50     Demo: Upgrading to Blutooth 4.2
09:50 – 10:40     Lab #1: Over-The_Air (OTA) Firmware Upgrade
10:40 – 11:15     Coffee Break
11:15 – 12:15     Lab #2: Blutooth 4.2 Features
12:15 – 13:15     Lab #3: Multi-Role Bluetooth Low Energy Design
13:50 – 14:00     Wrap-Up
14:00 – 14:45     Lunch
14:45 – 15:45     Energy Harvesting Concept and Introduction
15:45 - 16:45     Solar powered IoT device kit
16:45 – 17:00     Open questions, End of Workshop

 

Required Software:

​PSoC Creator 3.3 SP1 (or newer) 
CySmart 1.2 (or newer)
Bluetooth Low Energy Pioneer Kit
Tera Term

Required Hardware:

Bluetooth Low Energy Pioneer Kit (Free to all attendees upon arrival)
CY8CKIT-143A PSoC® 4 Bluetooth Low Energy 256KB Module with Bluetooth 4.2 Radio (Free to all attendees upon arrival)
CY5677 CySmart Bluetooth® Low Energy (BLE) 4.2 USB Dongle (Free to all attendees upon arrival)
Windows-based laptop with at least 2 free USB ports.

Register for Free today!

Workshop Registration