You are here

Pelion Device Management for Infineon PSoC® 64 Secure MCUs Training Series | Cypress Semiconductor

Pelion Device Management for Infineon PSoC® 64 Secure MCUs Training Series

Have ambitions to deploy millions of Internet of Things (IoT) devices? You'll want to make sure to they are secure - with unique identities and credentials to prevent unwanted tampering. You'll also want to enable them with device management so you can monitor and update them with improvements and fixes if anything goes wrong. This Getting Started video training series shows you how the Pelion Device Management service can be used seamlessly with PSoC 64 Secure MCUs from Infineon to accelerate your IoT device development and deployment.

Video Length: 
2:55

This is Part 1 of 4 of which provides an overview of the PSoC 64 Secure MCU and Pelion Device Management hardware/software solution enabling robust security for your devices, data, and connectivity.

Video Length: 
19:42

This is Part 2 of 4 of which explains how to setup the development environment and provision the PSoC 64 Secure MCU Dev Kit with credentials to connect to Pelion.

Video Length: 
10:43

This is Part 3 of 4 which showcases how to build and run the device application enabling device management services such as remote monitoring and firmware over-the-air updates.

Video Length: 
12:25

This is Part 4 of 4 which provides a tutorial on how to monitor your PSoC 64 Secure MCU based device remotely and complete a firmware over-the-air update with Pelion.

CY8CKIT-064B0S2-4343W

The PSoC 64 Secure Boot Wi-Fi BT Pioneer Kit (CY8CKIT-064B0S2-4343W) is a low-cost hardware platform that enables design and debug of the PSoC 64 Secure Boot MCU and the Murata Type 1DX Module (CYW4343W Wi-Fi + Bluetooth Combo Chip).