You are here

EZ-PD™ CCG3PA-NFET: USB-C PD controller with NFET Gate driver | Cypress Semiconductor

EZ-PD™ CCG3PA-NFET: USB-C PD controller with NFET Gate driver

  • CCG3PA-NFET

Cypress’ EZ-PDTM CCG3PA-NFET is a highly integrated USB-C Power Delivery port controller for power adapters. It integrates NFET gate driver for VBUS and is compatible with the latest USB-C Power Delivery standard. In addition CCG3PA-NFET also supports legacy protocols including QC4.0, Apple 2.4A charging, Samsung AFC and BC1.2 with no additional BOM.

CCG3PA-NFET features

  • Supports USB PD3.0 with Programmable Power Supply (PPS)
  • Supports QC4+, QC4.0, QC3.0, QC2.0, Samsung AFC, Apple charging and BC v1.2
  • Integrates NFET gate driver to drive the load switch
  • 5 m Ω Current sense resistor
  • Supports independent constant current (CC) and constant voltage (CV) modes of operation
  • Protects against accidental VBUS to CC short
  • 24-QFN package (4 x 4) with –40 °C to +105 °C extended industrial temperature range
  • USB-C Reference schematics available for both Opto coupler  and Direct feedback designs.

Refer Documentation tab for further details on the product

Roadmap USB Roadmap

Reference designs Type-C Power Adapter Reference Design

Product brief: CCG3PA-NFET product brief

 

CCG3PA-NFET reference schematics are available for both Opto coupler based designs and Direct feedback based designs. For more information please refer the Type-C Power Adapter Reference Design page

If you need the daughter cards based on the above schematics then please contact  your local Cypress Sales team.

To build your own Firmware using CCG3PA-NFET programmable controllers, refer EZ-PDTM Power Software Development

To configure your Firmware using CCG3PA-NFET refer EZ-PDTM Configuration Utility