You are here

Cypress Traveo™ II for Body CYT3BB/4BB Series | Cypress Semiconductor

Cypress Traveo™ II for Body CYT3BB/4BB Series

Cypress’ Traveo™ II CYT3BB/4BB series MCUs comes with processing power and network connectivity built into the Arm® Cortex®-M7F single/dual core.

The CYT3BB/4BB series is designed for body control modules, gateway, and infotainment applications. This series supports frequent data changes with faster, more secure communication via Ethernet AVB (Audio Video Bridging), CAN-FD and FlexRay.

These devices also meet broad application needs by embedding High-speedSPI (Single, Dual, Quad, or Octal) or HyperBus™ interface for external memory interface, Secure Digital High Capacity (SDHC) interface supporting embedded MultiMediaCard (eMMC), SecureDigital (SD), or SDIO (Secure Digital Input Output), as well as Inter-IC Sound (I2S) Interfaces implemented for connecting digital audio devices.

Traveo II devices have advanced security features with the introduction of HSM (Hardware security module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

This family features six power modes that enable ECUs to minimize overall power consumption and cutting-edge security features for secure communication with the great scalability in memory size and pin count.

Our MCUs come with optimized software platform that is available for Cypress AUTOSAR MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

Block Diagram:

32-bit MCU Core Systems

  • 250-MHz Arm® Cortex® -M7F single/dual core
  • 4 MB code flash, 256 KB work flash and 768 KB SRAM and Arm® Cortex®-M0+

Connectivity

  • 1-ch Ethernet AVB (Audio Video Bridging) for real-time media streaming and 8-ch CAN FD for faster communication for increased data bandwidth
  • Up to 11-ch runtime-reconfigurable Serial Communication Block (SCB) each configurable as I2C, SPI or UART in addition to 20-ch LIN/UART

A/D Converter

  • Up to 72-ch 12-bit with 3x successive approximation ADC (SAR ADC) units

Timers

  • Up to 63-ch 16 bit and 8-ch 32-bit Timer Counter Pulse Width Modulator (TCPWM)
  • Real Time Clock (RTC)
  • Event generation timer
  • Audio Interfaces
  • Up to 3 Inter-IC Sound (I2S) Interfaces for connecting digital audio devices

GPIOs

  • Up to 220 Programmable GPIOs

Safety and Security

  • Embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module), and hardware-accelerated cryptography engine (on/off option)*
  • One Time Programmable Fuses (OTP) to manage device lifecycle
  • Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU) and Peripheral Protection Unit (PPU) for memory and peripheral protection
  • Support JTAG security for secure debugging
  • Safety features: ECC for memory, monitors for power supply voltage and clock

Packages

  • 100/144/176 TEQFP, 272 BGA

Temperature Range

  • -40 to 105°C (S-grade)
  • -40 to 125°C (E-grade)

*Firmware solution available include Cypress’ Security Low Level Driver and third-party firmware

Getting Started with the Traveo II


Evaluate the Traveo II

 

CYTVII-B-E-BB Traveo II Base Body Evaluation Board

The CYTVII-B-E-BB is a generic base board that can be connected to compatible Traveo™ II body-entry or body-high evaluation boards so as to extend the functionality offered by the evaluation board.

  • Connects to most CYTVII-B-E-xxx and CYTVII-B-H-xxx evaluation boards
  • Ten high-speed CAN transceives and six LIN transceivers
  • One EEPROM device with SPI interface
  • User switches, user LEDs, and potentiometer on-board
  • Two FlexRay interfaces
  • One CXPI transceiver
  • Generic 10x2 IO headers to expand the functionality of Traveo II evaluation boards

Learn More

CYTVII-B-E-BB Traveo II Base Body Evaluation Board

 

 

CYTVII-B-H-176-SO Traveo II Socketed Body Evaluation Board

The CYTVII-B-H-176-SO, a 176-pin, socketed evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BF series Flash 8M 176 TEQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-176-SO Traveo II Socketed Body Evaluation Board

 

 

CYTVII-B-H-4M-176-CPU Traveo II Body Evaluation Board

The CYTVII-B-H-4M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BB series Flash 4M 176pin TEQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-4M-176-CPU Traveo II Extended Body Evaluation Board

 

 

CYTVII-B-H-4M-272-CPU Traveo II Body Evaluation Board

The CYTVII-B-H-4M-272-CPU, a 272-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BB series 4M Flash 272pin BGA Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • Audio Interface with 3.5mm jack
  • SDCard- eMMC connector
  • Hyper Flash and Hyper RAM
  • Dual QSPI
  • Gigabit Ethernet interface with RJ45 connector
  • Automotive Ethernet with DB9 connector
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-4M-272-CPU Traveo II Extended Body Evaluation Board

 

 

Traveo II Sample Driver Library

Infineon’s Sample Driver Library (SDL) simplifies software development for Traveo II devices

  • Drivers for the extensive set of peripherals supported
  • Arm® Cortex® Microcontroller Software Interface Standard (CMSIS) core access header files directly from the CMSIS 5.0 release
  • CMSIS complaint device header files, startup code (platform initialization), and device configuration header files
  • SDL Application Programming Interface Reference Manual
  • Examples to evaluate various peripherals

Learn More

Traveo II Sample Driver Library Logo

 

 

Traveo II Auto Flash Utility

Auto Flash Utility is a stand-alone flash programmer tool which supports Traveo II MCUs and provides programming functionality via MiniProg4 and J-Link probes. This tool is based on OpenOCD open source.

Learn More

Traveo II Auto Flash Utility Logo

 

Ordering Code[1] Package CM7 Cores

Code-flash

(KB)

Work-flash

(KB)

RAM (KB)

ADC

Channels

SCB

Channels

LIN

Channels

I2S

Channels

Ethernet

Channels

SD/eMMC

Temperature

Grade

CYT3BB5CEBQ0AESGS 100-TEQFP 1 4160[2] 256[3] 768 39 9 9 2 1 1 S[4]
CYT3BB5CEBQ0AEEGS 100-TEQFP 1 4160 256 768 39 9 9 2 1 1 E[5]
CYT3BB7CEBQ0AESGS 144-TEQFP 1 4160 256 768 54 10 12 3 1 1 S
CYT3BB7CEBQ0AEEGS 144-TEQFP 1 4160 256 768 54 10 12 3 1 1 E

CYT3BB8CEBQ0AESGS

buy online

176-TEQFP 1 4160 256 768 64 10 16 3 1 1 S
CYT3BB8CEBQ0AEEGS 176-TEQFP 1 4160 256 768 64 10 16 3 1 1 E
CYT3BBBCEBQ0BZSGS 272-BGA 1 4160 256 768 72 11 16 3 1 1 S

CYT3BBBCEBQ0BZEGS

buy online

272-BGA 1 4160 256 768 72 11 16 3 1 1 E
CYT4BB5CEBQ0AESGS 100-TEQFP 2 4160 256 768 39 9 9 2 1 1 S
CYT4BB5CEBQ0AEEGS6 100-TEQFP 2 4160 256 768 39 9 9 2 1 1 E
CYT4BB7CEBQ0AESGS 144-TEQFP 2 4160 256 768 54 10 12 3 1 1 S
CYT4BB7CEBQ0AEEGS6 144-TEQFP 2 4160 256 768 54 10 12 3 1 1 E
CYT4BB8CEBQ0AESGS 176-TEQFP 2 4160 256 768 64 10 16 3 1 1 S
CYT4BB8CEBQ0AEEGS6 176-TEQFP 2 4160 256 768 64 10 16 3 1 1 E
CYT4BBBCEBQ0BZSGS 272-BGA 2 4160 256 768 72 11 16 3 1 1 S
CYT4BBBCEBQ0BZEGS6 272-BGA 2 4160 256 768 72 11 16 3 1 1 E

Notes

1. Supported shipment types are “Tray” (default) and “Tape and Reel”. Add the character ‘T’ at the end to get the ordering code for “Tape and Reel” shipment type.

2. Code-flash size 4160 KB = 32 KB × 126 (Large Sectors) + 8 KB × 16 (Small Sectors).

3. Work-flash size 256 KB = 2 KB × 96 (Large Sectors) + 128 B × 512 (Small Sectors).

4. S-grade Temperature (–40 °C to 105 °C).

5. E-grade Temperature (–40 °C to 125 °C).

6. These parts are available as engineering samples.

Traveo II Sample Driver Library

Infineon’s Sample Driver Library (SDL) simplifies software development for Traveo II devices

  • Drivers for the extensive set of peripherals supported
  • Arm® Cortex® Microcontroller Software Interface Standard (CMSIS) core access header files directly from the CMSIS 5.0 release
  • CMSIS complaint device header files, startup code (platform initialization), and device configuration header files
  • SDL Application Programming Interface Reference Manual
  • Examples to evaluate various peripherals
Traveo II Sample Driver Library Icon

 

Traveo II Auto Flash Utility

Auto Flash Utility is a stand-alone flash programmer tool which supports Traveo II MCUs and provides programming functionality via MiniProg4 and J-Link probes. This tool is based on OpenOCD open source.

Traveo II Auto Flash Utility Icon

 

Infineon Development Kits

CYTVII-B-E-BB

CYTVII-B-E-BB

Development Kits

The CYTVII-B-E-BB is a generic base board that can be connected to compatible Traveo™ II body-entry or body-high evaluation boards so as to extend the functionality offered by the evaluation board.

CYTVII-B-H-176-SO

CYTVII-B-H-176-SO

Development Kits

The CYTVII-B-H-176-SO, a 176-pin, socketed evaluation board is based on the Traveo II body high family of devices.

CYTVII-B-H-4M-176-CPU

CYTVII-B-H-4M-176-CPU

Development Kits

The CYTVII-B-H-4M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

CYTVII-B-H-4M-272-CPU

CYTVII-B-H-4M-272-CPU

Development Kits

The CYTVII-B-H-4M-272-CPU, a 272-pin evaluation board is based on the Traveo II body high family of devices.

Cypress Developer Community Banner

Traveo II Customer Training Workshops