You are here

Cypress Traveo™ II 32-bit Arm Automotive Microcontrollers (MCUs) | Cypress Semiconductor

Cypress Traveo™ II 32-bit Arm Automotive Microcontrollers (MCUs)

Traveo™ II for automotive body electronics applications offers cutting-edge performance, safety, and security features.

The Traveo II family is designed for cars of the future. With processing power and network connectivity built into a single Arm® Cortex®- M4F and dual Cortex®- M7F, this family of microcontrollers has enhanced performance from 400 DMIPS in Traveo, to 1500 DMIPS in Traveo II.

This family also provides the scalability across memory size and pin count. The IP compatibility enables customers to design and develop their system with a single-platform MCU solution.

Traveo II devices have advanced security features with the introduction of HSM (Hardware security module), dedicated Cortex®-M0+ for secure processing, and embedded flash in dual bank mode for FOTA requirements.

Traveo II features six power modes that enable ECUs to minimize overall power consumption.

Our MCUs come with optimized software platform that is available for Cypress AUTOSAR MCAL (Microcontroller Abstraction Layer), self-test libraries, Flash EEPROM emulation, as well as security low level drivers, combined with third-party firmware.

Feature Overview

1 Low-voltage detection/brownout detection

2 Resistor capacitor

3 Phase-locked loop/frequency-locked loop

4 Watchdog timer/clock supervisor

5 Serial wire debug/Joint Test Action Group

6 Floating point unit

7 Memory protection unit

8 Instruction cache

9 Data cache

10 Peripheral protection unit

11 Direct memory access

12 Interrupt request/Non maskable interrupt

13 Clock extension peripheral

14 Inter-IC sound/time division multiplexed

15 Timer/counter/pulse-width modulation

16 Embedded MultiMediaCard

17 Serial memory interface

18 Serial peripheral interface/Inter-integrated circuit/universal asynchronous receiver transmitter

19 Quad serial peripheral interface/high-speed

20 Analog-to-digital converter

Portfolio

Traveo II Portfolio

System-Level, body-electronics solution

System-Level, body-electronics solution

FAMILY FEATURES:

Performance

Cypress’ Traveo II family is connected-car ready with the high-performance CPU powered by Arm® Cortex®-M4F and M7F operating up to 350 MHz.  Traveo II provides great connectivity capabilities like CAN FD, CXPI, Ethernet and FlexRay for faster communication and increased data-bandwidth. With the High-speed SPI (Single, Dual, Quad, or Octal) or HyperBus interface for external memory interface, Secure Digital High Capacity (SDHC) interface supporting embedded MultiMediaCard (eMMC), SecureDigital (SD), or SDIO (Secure Digital Input Output), as well as Inter-IC Sound (I2S) Interfaces for connecting digital audio devices in the high-end series (CYT4BF series), Traveo II works very well for a wide variety of applications such as body control modules, HVAC, gateway, and infotainment. There are two options for the temperature range: S-Grade for 105℃ and E-Grade for 125℃.

Safety and Security

Today’s automobiles integrate multiple ECUs that are connected through various networks. Traveo II offers cutting-edge security features to secure data. Thanks to the embedded eSHE (Enhanced Secure Hardware Extension), HSM (Hardware Security Module) and hardware-accelerated cryptography engine, Traveo II enables secure communication and update firmware over the air with embedded flash in dual bank mode. One Time Programmable Fuses (OTP) is embedded into the devices that helps manage device lifecycle for additional security. Secure boot is provided from ROM with root-of-trust and authentication/integrity check of the flash image. The memory and peripheral protection are supported by Memory Protection Unit (MPU), Shared Memory Protection Unit (SMPU), and Peripheral Protection Unit (PPU). JTAG security also supported for secure debugging.

The Traveo II family also has state-of-the-art safety features, including ECC for memories, power supply voltage and clock monitors, watchdogs, and self-test libraries. Read more about our functional safety capabilities at: https://www.cypress.com/functional-safety

The Traveo II family also has state-of-the-art safety features, including ECC for memories, power supply voltage and clock monitors, watchdogs, and self-test libraries. Read more about our functional safety capabilities at: http://www.cypress.com/functional-safety

Power Modes

Traveo II family supports six power modes. Active, Sleep, Low-Power Active, Low-Power Sleep, DeepSleep, and Hibernate (typ. 5 uA). These microcontrollers also supports cyclic wake-up from DeepSleep to optimize power consumption.

AUTOSAR MCAL EMBEDDED PLATFORM

Traveo II supports all relevant versions of AUTOSAR MCAL, including optional microcontroller modules such as CorTst1, FlsTst2, RamTst3, FEE4 and Security LLD5.

1 Core Test

2 Flash Test

3 RAM Test

4 Flash EEPROM Emulation

5 Security Low-Level Driver

Getting Started with the Traveo II


Evaluate the Traveo II

 

CYTVII-B-E-1M-SK Traveo II Low-Cost, Arduino Compatible Evaluation Board

The CYTVII-B-E-1M-SK is a low-cost easy to use evaluation board based on the Traveo II body entry family of devices. It is designed in an Arduino form factor so that users can connect many off-the-shelf Arduino shields to it, to expand its functionality.

  • Traveo II CYT2B7 series Flash 1M 100pin LQFP Device
  • On-board programming and debug interface using Kitprog3
  • High Speed CAN Transceiver
  • USB to UART bridge
  • User switch, LED and potentiometer
  • Arduino-style headers for connecting many off-the-shelf Arduino shields

Learn More

CYTVII-B-E-1M-SK Traveo II Low-Cost, Arduino Compatible Evaluation Board

 

 

CYTVII-B-E-BB Traveo II Base Body Evaluation Board

The CYTVII-B-E-BB is a generic base board that can be connected to compatible Traveo™ II body-entry or body-high evaluation boards so as to extend the functionality offered by the evaluation board.

  • Connects to most CYTVII-B-E-xxx and CYTVII-B-H-xxx evaluation boards
  • Ten high-speed CAN transceives and six LIN transceivers
  • One EEPROM device with SPI interface
  • User switches, user LEDs, and potentiometer on-board
  • Two FlexRay interfaces
  • One CXPI transceiver
  • Generic 10x2 IO headers to expand the functionality of Traveo II evaluation boards

Learn More

CYTVII-B-E-BB Traveo II Base Body Evaluation Board

 

 

CYTVII-B-E-100-SO Traveo II Socketed Body Evaluation Board

The CYTVII-B-E-100-SO, a 100-pin, socketed evaluation board is based on the Traveo II body entry family of devices. The socket is provided such that the users can replace the microcontroller of the same pin configuration available in the family.

  • 100 PIN Socket supports Traveo II CYT2B7 series Flash 1M 100pin LQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-E-100-SO Traveo II Socketed Body Evaluation Board

 

 

CYTVII-B-E-176-SO Traveo II Socketed Body Evaluation Board

The CYTVII-B-E-176-SO, a 176-pin socketed evaluation board is based on the Traveo II body entry family of devices. The socket is provided such that the users can replace the microcontroller of the same pin configuration available in the family.

  • 176 PIN Socket supports Traveo II CYT2B7 series Flash 1M 176pin LQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with a manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interface for connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-E-176-SO Traveo II Socketed Body Evaluation Board

 

 

CYTVII-B-E-1M-176-CPU Traveo II Body Evaluation Board

The CYTVII-B-E-1M-176-CPU, a 176pin evaluation board is based on the Traveo II body entry family of devices.

  • Traveo II CYT2B7 series Flash 1M 176pin LQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-E-1M-176-CPU Traveo II Body Evaluation Board

 

 

CYTVII-B-E-2M-176-CPU Traveo II Body Evaluation Board

The CYTVII-B-E-2M-176-CPU, a 176-pin evaluation board is based on the Traveo II body entry family of devices.

  • Traveo II CYT2B9 series Flash 2M 176pin LQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-E-2M-176-CPU Traveo II Extended Body Evaluation Board

 

 

CYTVII-B-H-176-SO Traveo II Socketed Body Evaluation Board

The CYTVII-B-H-176-SO, a 176-pin, socketed evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BF series Flash 8M 176 TEQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-176-SO Traveo II Socketed Body Evaluation Board

 

 

CYTVII-B-H-4M-176-CPU Traveo II Body Evaluation Board

The CYTVII-B-H-4M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BB series Flash 4M 176pin TEQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-4M-176-CPU Traveo II Extended Body Evaluation Board

 

 

CYTVII-B-H-4M-272-CPU Traveo II Body Evaluation Board

The CYTVII-B-H-4M-272-CPU, a 272-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BB series 4M Flash 272pin BGA Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • Audio Interface with 3.5mm jack
  • SDCard- eMMC connector
  • Hyper Flash and Hyper RAM
  • Dual QSPI
  • Gigabit Ethernet interface with RJ45 connector
  • Automotive Ethernet with DB9 connector
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-4M-272-CPU Traveo II Extended Body Evaluation Board

 

 

CYTVII-B-H-8M-176-CPU Traveo II Body Evaluation Board

The CYTVII-B-H-8M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4BF series Flash 8M 176pin TEQFP Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-8M-176-CPU Traveo II Extended Body Evaluation Board

 

 

CYTVII-B-H-8M-320-CPU Body Evaluation Board

The CYTVII-B-H-8M-320-CPU, a 320-pin evaluation board is based on the Traveo II body high family of devices.

  • Traveo II CYT4FB series 8M Flash 320pin BGA Device
  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg
  • Reset controller with manual reset switch and voltage supervision
  • One user switch and one user LED
  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB
  • USB to UART bridge

Learn More

CYTVII-B-H-8M-320-BGA Body Evaluation Board

 

 

Traveo II Sample Driver Library

Infineon’s Sample Driver Library (SDL) simplifies software development for Traveo II devices

  • Drivers for the extensive set of peripherals supported
  • Arm® Cortex® Microcontroller Software Interface Standard (CMSIS) core access header files directly from the CMSIS 5.0 release
  • CMSIS complaint device header files, startup code (platform initialization), and device configuration header files
  • SDL Application Programming Interface Reference Manual
  • Examples to evaluate various peripherals

Learn More

Traveo II Sample Driver Library Logo

 

 

Traveo II Auto Flash Utility

Auto Flash Utility is a stand-alone flash programmer tool which supports Traveo II MCUs and provides programming functionality via MiniProg4 and J-Link probes. This tool is based on OpenOCD open source.

Learn More

Traveo II Auto Flash Utility Logo

 

CYT2B6

Core: Coretex-M4, 80MHz

ASIL: ASIL-B

Security: HSM

Flash: 512KB

RAM: 64KB

Characteristic resources: -

Packages: LQFP64 to 100pin

Temperature Range: -40 to 125

    CYT2B7

    Core: Coretex-M4, 160MHz

    ASIL: ASIL-B

    Security: HSM

    Flash: 1MB

    RAM: 128KB

    Characteristic resources: -

    Packages: LQFP 64 to 176pin

    Temperature Range: -40 to 125

      CYT2B9

      Core: Coretex-M4, 160MHz

      ASIL: ASIL-B

      Security: HSM

      Flash: 2MB

      RAM: 256KB

      Characteristic resources: CXPI

      Packages: LQFP 64 to 176pin

      Temperature Range: -40 to 125

        CYT2BL

        Core: Coretex-M4, 160MHz

        ASIL: ASIL-B

        Security: HSM

        Flash: 4MB

        RAM: 512KB

        Characteristic resources: CXPI

        Packages: LQFP 64 to 176pin

        Temperature Range: -40 to 125

         

         

         

         

          CYT3BB/4BB

          Core: Coretex-M7, 250MHz

          Single/Dual

          ASIL: ASIL-B

          Security: HSM

          Flash: 4MB

          RAM: 768KB

          Characteristic resources: eMMC, Ethernet, I2S/TDM

          Packages: TEQFP 100 to 176pin

          BGA 272pin

          Temperature Range: -40 to 125

           

            CYT4BF

            Core: Coretex-M7, 350MHz

            Dual

            ASIL: ASIL-B

            Security: HSM

            Flash: 8MB

            RAM: 1024KB

            Characteristic resources: eMMC, Ethernet, FlexRay, I2S/TDM

            Packages: TEQFP 176pin

            BGA 320pin

            BGA 320pin

            Temperature Range: -40 to 125

               

              Traveo II Sample Driver Library

              Infineon’s Sample Driver Library (SDL) simplifies software development for Traveo II devices

              • Drivers for the extensive set of peripherals supported
              • Arm® Cortex® Microcontroller Software Interface Standard (CMSIS) core access header files directly from the CMSIS 5.0 release
              • CMSIS complaint device header files, startup code (platform initialization), and device configuration header files
              • SDL Application Programming Interface Reference Manual
              • Examples to evaluate various peripherals
              Traveo II Sample Driver Library Icon

               

              Traveo II Auto Flash Utility

              Auto Flash Utility is a stand-alone flash programmer tool which supports Traveo II MCUs and provides programming functionality via MiniProg4 and J-Link probes. This tool is based on OpenOCD open source.

              Traveo II Auto Flash Utility Icon

               

              Infineon Development Kits

              CYTVII-B-E-1M-SK

              CYTVII-B-E-1M-SK

              Development Kits

              The CYTVII-B-E-1M-SK is a low-cost easy to use evaluation board based on the Traveo II body entry family of devices.

              CYTVII-B-E-BB

              CYTVII-B-E-BB

              Development Kits

              The CYTVII-B-E-BB is a generic base board that can be connected to compatible Traveo II body-entry or body-high evaluation boards so as to extend its functionality.

              CYTVII-B-E-100-SO

              CYTVII-B-E-100-SO

              Development Kits

              The CYTVII-B-E-100-SO, a 100-pin, socketed evaluation board is based on the Traveo II body entry family of devices.

              CYTVII-B-E-176-SO

              CYTVII-B-E-176-SO

              Development Kits

              The CYTVII-B-E-176-SO socketed evaluation board is based on the Traveo II body entry family of devices.

              CYTVII-B-E-1M-176-CPU

              CYTVII-B-E-1M-176-CPU

              Development Kits

              The CYTVII-B-E-1M-176-CPU, a 176pin evaluation board is based on the Traveo II body entry family of devices.

              CYTVII-B-E-2M-176-CPU

              CYTVII-B-E-2M-176-CPU

              Development Kits

              The CYTVII-B-E-2M-176-CPU, a 176-pin evaluation board is based on the Traveo II body entry family of devices.

              CYTVII-B-H-176-SO

              CYTVII-B-H-176-SO

              Development Kits

              The CYTVII-B-H-176-SO, a 176-pin, socketed evaluation board is based on the Traveo II body high family of devices.

              CYTVII-B-H-4M-176-CPU

              CYTVII-B-H-4M-176-CPU

              Development Kits

              The CYTVII-B-H-4M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

              CYTVII-B-H-4M-272-CPU

              CYTVII-B-H-4M-272-CPU

              Development Kits

              The CYTVII-B-H-4M-272-CPU, a 272-pin evaluation board is based on the Traveo II body high family of devices.

              CYTVII-B-H-8M-176-CPU

              CYTVII-B-H-8M-176-CPU

              Development Kits

              The CYTVII-B-H-8M-176-CPU, a 176-pin evaluation board is based on the Traveo II body high family of devices.

              CYTVII-B-H-8M-320-CPU

              CYTVII-B-H-8M-320-CPU

              Development Kits

              The CYTVII-B-H-8M-320-CPU evaluation board is based on the Traveo™ II body high family of devices.

              Cypress Developer Community Banner

              Traveo II Customer Training Workshops