FLASH Programmer | Cypress Semiconductor
FLASH MCU Programmer
COM port of PC and target board are connected via RS232C-cable.
On the target board side, the circuit that converts the signal level of RS232C into the signal level of the microcomputer is necessary.
FLASH USB Programmer
USB port of PC and target board are connected via MB2146-09A-E or MB2146-08-E.
FLASH USB Programmer New 8FX
USB port of PC and target board are connected via MB2146-08-E or MB2146-07-E.
FLASH USB Direct Programmer
USB port of PC and target board are connected via USB-cable.
PC-Helper has the following function with the support software for MB2146-07-E BGMA.
- Rewriting of firmware of BGMA.
- The Standalone Programmer's support.
This content contains information on Cypress products that have been migrated from Spansion's website in conjunction with our merger. Although marked with the name of the company that developed the material (Spansion or Fujitsu), Cypress continues to offer the content to our customers. There is no change to this information as a result of this migration. Future revisions will occur when appropriate, and changes will be noted in the revision history.