EZ-PD™ Configuration Utility | Cypress Semiconductor
EZ-PD™ Configuration Utility
EZ-PD™ Configuration Utility:
HELPS YOU CONFIGURE AND PROGRAM YOUR CCGx DEVICE
Recommended devices: CCG2, CCG3, CCG4, CCG5, CCG6, CCG3PA, CMG1, PAG1S
Cypress EZ-PD™ controllers (CCG1, CCG2, CCG3, CCG4, CCG5, CCG6, CMG1, CCG3PA, and PAG1S) are fully programmable USB Type-C port controllers suited for all USB Power Delivery applications such as cables, dongles, notebooks, monitors and power adapters. The Cypress EZ-PD controller can be configured as per customer requirements using the EZ-PD™ Configuration Utility.
The EZ-PD™ Configuration Utility is a GUI based Microsoft Windows application developed by Cypress to guide a CCGx/PAG1S user through the process of configuring and programming the chip. The utility allows users to:
- Select and configure the parameters they want to modify
- Program the resulting configuration onto the target CCGx/PAG1S device.
The utility works with the Cypress supplied hardware which hosts the CCGx controllers along with a USB interface.
|EZ-PD Configuration Utility Setup||Windows installer for the EZ-PD Configuration Utility||35 MB||5/5/2020|
|EZ-PD Configuration Utility Setup ISO||Installer in .iso format which can be burnt into a DVD||616 MB||5/5/2020|
|EZ-PD Configuration Utility User Manual.pdf||3 MB||5/5/2020|
|EZ-PD™ Configuration Utility Release Notes (v1.3).pdf||206 KB||5/5/2020|
For any questions, please contact Online Tech Support Case System