You are here

65W USB-C Power Adapter Reference Design using PAG1S and PAG1P (PAG1 Solution) | Cypress Semiconductor

65W USB-C Power Adapter Reference Design using PAG1S and PAG1P (PAG1 Solution)

Last Updated: 
May 18, 2021

The 65W Power Adapter Reference Design Board is built using PAG1S and PAG1P controllers. The solution meets the global efficiency standards including DoE Level VI/ CoC Tier 2 and passes the Conducted Emission as per EN 55032 B standard. The solution is targeted for USB-C PD (including PPS), QC power adapters. It can also support adapters that require legacy charging including Apple charging, BC1.2, QC 3.0 and Samsung AFC. Together, PAG1S and PAG1P offer a low BOM cost, high performance PD/PPS/QC compliant solution.

65W Image 1

65W Image 2

Reference design features:

  • Supports USB PD 3.0
  • Fixed PDO: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A
  • PPS: 3.3V-21V/3A
  • Passes CoC Tier 2 and DoE Level VI Efficiency standards
  • Passes CE as per EN55032 B
  • Low BOM cost with a simple primary start-up controller (PAG1P) and an integrated SR+PD controller (PAG1S)

The board test report is shared below for customer reference.