You are here

Reference Designs | Cypress Semiconductor

CY4606 - EZ-USB HX2LP High-Speed Low-Power USB 2.0 Compliant 4-Port Hub

EZ-USB HX2LP Chip Image

EZ-USB HX2LP(TM) USB 2.0 4-Port Hub

Cypress offers a complete reference design for developing a fixed-function, low-power 4-port USB 2.0 hub that is production ready. 

Key Features:

CY4611B - USB 2.0 USB to ATA Reference Design

CY4611B - USB 2.0 USB to ATA Reference Design

Updated to rev 2.5 on 9/1/2005. Now with Cypress's new EZ-USB FX2LP device enabling bus-powered operation and improved support for removable devices.            

CY4615B - Hi-speed USB 2.0-to-ATA/ATAPI Bus-Powered Reference Design (with EZ-USB AT2LP)

High-Speed USB to ATA (Advanced Technology Attachment)

Develop your mass storage bridge solution in hours, not weeks, using the Cypress EZ-USB AT2LP(TM)! Leveraging our existing mass storage expertise, the EZ-USB AT2LP adds large capacity drive support and ATA interrupt request (IRQ) support, all in an easy-to-use, low-cost configurable device.


EZ-PD™ CCG3PA USB-C(PPS) Power Bank Solution using Qorvo, formerly Active Semi, reference design

EZ-PD™ CCG3PA USB-C(PPS)/USB-A Charging Power Hub Solution using Qorvo, formerly Active-Semi, reference design

EZ-PD™ CCG3PA Automotive 2x100W Charge-Only Reference Design with MPS

The 2x100W CCG3PA Automotive Charge-only reference design was developed by Cypress to demonstrate a highly integrated, intelligent in-vehicle charging solution. The DC-DC controller used is the MPS MPQ4214. The features of this reference design are: