SK-FM3-64PMC1-JLINK | Cypress Semiconductor
SK-FM3-64PMC1-JLINK
This development kit is no longer available. This web page has been left in place for informational purposes only.
Supports MB9A310L Series
PICTURE
DESCRIPTION
The SK-FM3-64PMC1-JLINK is a multifunctional evaluation board, including a Segger J-Link JTAG adapter, for the Spansion microcontroller of the MB9A310L Series.
The board allows the designer immediately to start software development before his own final target system is available.
Contents of the kit:
- Starterkit SK-FM3-64PMC1-JLINK incl. MB9AF314LPMC1
- J-Link - JTAG adapter with USB interface
- CD
- Userguide
- Schematic
- Software Examples
- Development Tools
FEATURES
- The SK-FM3-64PMC1-JLINK is a multifunctional evaluation board for the Spansion microcontroller of the MB9A310L Series.
- 8-12V unregulated external DC power supply
- On-board 5.0V and 3.3V voltage regulator
- Power-LED
- Two 7-Segment LED-Displays
- Reset button, Reset LED
- Two user buttons
- In-Circuit Flash programming (UART, USB, JTAG)
- All MCU pins routed to edge connectors
- All resources available for evaluation
- 4 MHz main crystal
- RS232 interface (SUB-D9 connector)
- USB to serial converter (Type-B connector)
- USB Host (Type-A) and Device (Type-B) connectors
- JTAG and ETM interface
- RoHS compliant
- CE conform
DOCUMENTATION
User Guide | sk-fm3-64pmc1_Readme.pdf |
Schematics | sk-fm3-64pmc1_schematic_V11.pdf |
Complete Driver, Documentation, Software & Tools package (v1.1) | SK-FM3-64PMC1-MB9AF132L_CD.zip |
Tools (contains Spansion Serial Port Viewer and Flash MCU programmer) | SK-FM3-64PMC1_tools.zip |
Drivers (contains USB-Virtual-COM-port (VCP) driver (see http://www.ftdichip.com/Drivers/VCP.htm for latest version), CMSIS-DAP debugging and Direct Flash programming) | sk-fm3-64pmc1-mb9af132l_drivers.zip |
JLINK User Guide | um08001_jlinkarm.pdf |
SK-FM3-64PMC1-JLINK - SOFTWARE EXAMPLES
The following software is for demonstration purposes only. It is not fully tested, nor validated in order to fulfill its task under all circumstances. Therefore, this software or any part of it must only be used in an evaluation laboratory environment.
Use only the template-project as starting point for your application. Only the template-project will be updated in case of any change of the header files, startup code etc.!
Tool specific Software Examples | |
---|---|
Template project for MB9AF314L | mb9af314l_template.zip (v2.2) |
A simple digital voltage meter (DVM) is realized by this project using ADC AN08. | mb9af314l_adc_dvm-E.zip (v1.3) |
A decimal counter is realized by Port 1 and Port 3 | mb9af314l_ioport_counter-E.zip (v1.3) |
This example initializes the Multifunctional Serial Interface 0 (UART, 115kBtit/s). | mb9af314l_uart-E.zip (v1.3) |
This example initializes the Multifunctional Serial Interface 0 (UART, 115kBtit/s) with RX-IRQ. | mb9af314l_uart_irq-E.zip (v1.3) |
Serial Port Viewer and Terminal | SerialPortViewerAndTerminalV57.zip |