You are here

PSoC 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W) | Cypress Semiconductor

PSoC 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W)

Last Updated: 
Feb 19, 2019

The PSoC 6 Wi-Fi BT Prototyping Kit (CY8CPROTO-062-4343W) is a low-cost hardware platform that enables design and debug of PSoC 6 MCUs. It comes with a CY8CMOD-062-4343W daughter card, industry-leading CapSense® for touch buttons and slider, on-board debugger/programmer with KitProg3, MicroSD card interface, 512-Mb Quad-SPI NOR flash, PDM microphone, and a thermistor. It also includes a Murata LBEE5KL1DX module, based on the CYW4343W combo device.

Featuring the PSoC 62 MCU, providing up to 2MB flash and 1MB SRAM

PSoC 6 is purpose-built for the IoT, delivering the industry’s lowest power, most flexibility, and built-in security for the IoT. It delivers dual-cores, with a 150-MHz Arm® Cortex®-M4 as the primary application processor and a 100-MHz Arm Cortex-M0+ as the secondary processor for low-power operations. To find out about the unique and differentiating features of our PSoC 6 MCUs, please visit the PSoC 6 product page.

CYPROTO-062-4343W PSoC 6 Wi-Fi BT Prototyping kit

Supported Software

The PSoC 6 Wi-Fi BT Prototyping Kit can be evaluated using ModusToolbox. It provides you with the PSoC 6 Software Development Kit (SDK) to evaluate and start designs with the unique and differentiating features of the PSoC 6 MCU portfolio, such as CapSense®, Bluetooth® Low Energy (BLE) and other peripherals.

ModusToolbox 1.0 provides support for the PSoC 6 MCU but does not include the Wi-Fi devices. If you intend to use PSoC 6 with the Wi-Fi devices, please contact your local salesperson here: https://www.cypress.com/about-us/sales-offices 

Kit Contents:

  • PSoC 6 Wi-Fi BT Prototyping baseboard
  • Micro B USB cable
  • Quick Start Guide