FM4-176L-S6E2GM - Arm® Cortex®-M4 MCU Pioneer Kit with Ethernet and USB Host | Cypress Semiconductor
FM4-176L-S6E2GM - Arm® Cortex®-M4 MCU Pioneer Kit with Ethernet and USB Host
The FM4-176L-S6E2GM MCU Pioneer Kit with Ethernet, USB and audio is a low-cost development platform for the Cypress 180MHz FM4 S6E2G-Series of Arm® Cortex MCUs. This kit enables rapid development of high-performance embedded systems using the Arduino™ Uno-compatible interface to connect Arduino shields for low-cost hardware expansion.
Featuring FM4 S6E2G-Series: Arm® Cortex-M4 MCU
Featuring Arduino™ Uno Form-factor with Onboard Sensors and CMSIS-DAP Debugger
- FM4 S6E2G-Series Pioneer Board
- USB Standard-A to Micro-B cable
- Quick Start Guide
This kit installs code examples designed for this hardware. These examples use PDL v.2.0.1 (older version). Each code example includes project files for IAR and Keil development environments. Most peripheral drivers have at least one code example, such as ADC, PWM, GPIO, UART, and so forth.
You can also use the Peripheral Driver Library (PDL) code examples. Download and install the PDL, and look in the examples folder. There are dozens of code examples available. You can retarget the examples to your hardware if necessary.