You are here

EZ-BT™ Module Programming Kit CYBT-413034-PROG | Cypress Semiconductor

EZ-BT™ Module Programming Kit CYBT-413034-PROG

Last Updated: 
Nov 17, 2020

The EZ-BT™ Module Programming Kit (CYBT-413034-PROG) enables you to easily program the following EZ-BT™ WICED modules prior to manufacturing: CYBT-413034-02, CYBT-413055-02, and CYBT-413061-02.

The life time of the socket used in this programming kit is 50,000 insertions.

For more information, visit:

www.cypress.com/products/ez-ble-and-ez-bt-bluetooth-modules - EZ-BT Module home pages

https://www.cypress.com/WICEDModuleProgrammerUserGuide - WICED Module Programmer User Guide – KBA225060

www.cypress.com/EZ-Serial - EZ-Serial Firmware Platform page

www.cypress.com/WICED - WICED SDK page

Figure 1: CYBT-413034-PROG Top View

 

To use the CYBT-413034-PROG:

1) Put the BLE module in the socket (ensure that the BLE module is in the correct position of the socket, as shown below)

Figure 2: Module in the socket

2) Connect the programming device with a USB cable to a computer that has been installed with WICED Module Programmer (www.cypress.com/WICEDModuleProgrammer)

3) Run the programming software to program the targeted BLE module with your selected fi­rmware.

Visit www.cypress.com/go/support for technical support.