You are here

CYTVII-B-E-2M-176-CPU Traveo II Body Evaluation Board | Cypress Semiconductor

CYTVII-B-E-2M-176-CPU Traveo II Body Evaluation Board

Last Updated: 
Mar 10, 2021

The CYTVII-B-E-2M-176-CPU, a 176-pin evaluation board is based on the Traveo II body entry family of devices. The evaluation board is designed to enable the users to develop and test basic functionalities provided by the micro-controller such User Switch, User LED and UART communication. Rest of the features like CAN, LIN, Potentiometer, LED’s and Switches etc that is not included in the board design, is still accessible in the SAMTEC connector. The evaluation board can be mounted on the CYTVII-B-E-BB base board for the extended features.

A downloadable User Manual helps with the installation, use and configuration of the board and includes the schematics and the layout. (see Documents section)

CYTVII-B-E-2M-176-CPU

Summary of Features:

  • Traveo II CYT2B9 series Flash 2M 176pin LQFP Device

  • Programming interface (Arm® Standard JTAG, Cortex® Debug, Cortex Debug + ETM and Arm ETM Mictor) to connect several programming tools such as IAR I-jet, Green Hills MULTI, also MiniProg.

  • Reset controller with manual reset switch and voltage supervision.

  • One user switch and one user LED

  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB.

  • USB to UART bridge

Connectors:

  • Micro USB connector for power, device programming and data transfer (UART)

  • Samtec connector interfacefor connecting to the base board CYTVII-B-E-BB.

Components:

Component Type Component Name
Microcontroller Traveo II CYT2B9 series Flash 2M 176pin LQFP Device
USB to UART CY7C65213-28PVXI
Reset Controller TPS3808G01QDBVRQ1
User Switch 1
USER LED 1