CY8CKIT-048 PSoC® Analog Coprocessor Pioneer Kit | Cypress Semiconductor
CY8CKIT-048 PSoC® Analog Coprocessor Pioneer Kit
NOTE: The CY8CKIT-048 is not supported in PSoC Creator 4.2 or later revision.
PSoC Programmer 3.24.2 or later and KitProg2 v1.01 or later are required to program the PSoC Analog Coprocessor device on the PSoC Analog Coprocessor Pioneer Kit. PSoC Creator installation or the kit installation automatically installs PSoC Programmer and KitProg2 drivers.
The PSoC® Analog Coprocessor Kit is a low-cost development platform to easily design sensor-based embedded solutions.
Featuring the PSoC Analog CoprocessorThe PSoC® Analog Coprocessor combines flexible Analog Front Ends, programmable Analog Filters, and high-resolution Analog-to-Digital converters along with an efficient-yet-powerful ARM® Cortex®-M0+ signal processing engine - enabling host processors to easily fetch aggregated, pre-processed and formatted complex sensor data over serial communication interfaces. |
![]() |
Sense AnythingIncludes five on-board sensors along with PSoC® Creator code examples - one analog sensor for each type of fundamental electrical quantity:
|
![]() |
Flexible Prototyping
|
![]() |
Kit Contents:
- PSoC Analog Coprocessor Pioneer Board
- USB Standard-A to Mini-B Cable
- Four jumper wires (4 inches each)
- Five connectors (one 10x1, two 8x1, one 6x1, and one 4x1)
- One metal disk
- Quick Start Guide