You are here

CY3280-22x45 Universal CapSense Controller Board | Cypress Semiconductor

CY3280-22x45 Universal CapSense Controller Board

Last Updated: 
Jun 26, 2019

Please visit the Getting Started with PSoC 1 page which will guide you through your first steps. It provides basic information about software, technical documentation, training and support infrastructure.

Kit Contents

  • CY3280-22x45 Universal CapSense Controller Board
  • CY3280-22x45 Universal CapSense Controller Board CD
  • Quick Start Guide
  • CY3240-I2USB Bridge
  • CY3210 MiniProg1 Programmer
  • USB Cable
Hardware Description
The Universal CapSense Controller Kit CY3280-22x45 will provide you with the hardware to evaluate Cypress’s best in class CapSense, communicate with other devices using UART or I2C and an additional connector that can be used to connect your custom hardware to interface sensors or output devices based on your requirements.


Hardware Required to Use This Kit

Any of the following CY8C3280 Universal CapSense Controller Boards:


CY8C22x45 device series provides a low-cost platform solution for the applications where analog and digital integration is required along with a reliable touch-sensing. Some of the typical applications are as following:

  • Home appliances
  • Learning kits
  • Automation
  • Liquid level sensing
  • Dispenser machines
  • Medical instruments

Note: If external OSC used, please power the power with external supply not MiniProg1 or I2CUSB Bridge.

Software Title Description Link
PSoC Designer This kit requires PSoC Designer for development
PSoC Programmer This kit requires PSoC Programmer for programming