You are here

CYBLE-212020-01: EZ-BLE™ Creator Bluetooth 4.2 Module | Cypress Semiconductor

CYBLE-212020-01: EZ-BLE™ Creator Bluetooth 4.2 Module

Last Updated: 
Jun 02, 2020

General Description

The CYBLE-212020-01 is a turnkey Bluetooth® Low Energy (BLE) wireless module solution and includes onboard crystal oscillators, trace antenna, passive components, and the Cypress PSoC 4 BLE BT 4.2 chip.

The CYBLE-212020-01 includes FCC/ISED/KC/MIC/CE RF certification and Bluetooth SIG qualification. The CYBLE-212020-01 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-212020-01 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 23 GPIOs in a 14.52 × 19.20 × 2.00 mm package. The CYBLE-212020-01 is drop-in compatible with the CYBLE-X120XX-0X modules.

The CYBLE-212020-01 is targeted at applications requiring large memory size and Bluetooth 4.2 compliance all in a cost-optimized solution.

Module Description

  • Module size: 14.52 mm ×19.20 mm × 2.00 mm (with shield)
  • Castelated solder pad connections for ease-of-use
  • 256-KB flash memory, 32-KB SRAM memory
  • Up to 23 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog,HI-Z digital, or strong output
  • Bluetooth 4.2 single-mode module
  • Industrial temperature range: –40 °C to +85 °C
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for programming
  • Certified to FCC, CE MIC, KC, and ISED regulations.  Refer to KBA210638 for RF certification test reports.
  • Bluetooth SIG 4.2 qualified
  • CYBLE-212020-EVAL EZ-BLE™ Creator BT 4.2 Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module