You are here

CYBLE-212006-01, CYBLE-202007-01, CYBLE-202013-11: EZ-BLE™ Creator XR Module | Cypress Semiconductor

CYBLE-212006-01, CYBLE-202007-01, CYBLE-202013-11: EZ-BLE™ Creator XR Module

Last Updated: 
Dec 28, 2020
The CYBLE-2X20XX-X1 is a Bluetooth Low Energy (BLE) wireless module solution. The CYBLE-2X20XX-X1 is a turnkey solution and includes onboard crystal oscillators, passive components, and the Cypress PSoC 4 BLE. Refer to the PSoC 4 BLE datasheet for additional details on the capabilities of the PSoC 4 BLE device used on this module.

General Description

The Cypress CYBLE-2X20XX-X1 modules are fully certified and qualified modules supporting Bluetooth Low Energy (BLE) wireless communication. The CYBLE-2X20XX-X1 modules are turnkey solutions that include onboard power amplifier (PA), low noise amplifier (LNA), crystal oscillators, trace antenna, passive components, and the Cypress PSoC® 4 BLE. 

The CYBLE-2X20XX-X1 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-2X20XX-X1 includes a royalty-free BLE stack compatible with Bluetooth 4.2 and provides up to 19 GPIOs in a 15 × 23 × 2.00 mm package. 

The CYBLE-2X20XX-X1 is offered in three options for antenna connection: 

  • Integrated trace antenna:  CYBLE-212006-01
  • External Antenna with u.FL connection:  CYBLE-202007-01
  • External Antenna with solder pad connection:  CYBLE-202013-11

Module Description:

  • Module size: 15.0 mm × 23.0 mm × 2.0 mm (with shield)
  • Extended Range: Up to 400 meters line-of-sight
  • Footprint compatible options for integrated antenna or antenna-less design options
  • Castelated solder pad connections for ease-of-use
  • Industrial temperature range: -40 °C to +85 °C
  • Up to 19 GPIOs
  • 256-KB flash memory, 32-KB SRAM memory
  • 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
  • 1 x Cypress CapSense® touch controller with SmartSense Auto-Tuning
  • Programmable digital
    • 4 x 16-bit configurable Timer/Counter/PWM blocks
    • 2 x configurable serial communication blocks
  • Watchdog timer with dedicated internal low-speed oscillator (ILO)
  • Two-pin SWD for Programming
  • Bluetooth 4.2 qualified single-mode module (CYBLE-212006-01 and CYBLE-202007-01 only)
  •  Certified to FCC, CE, MIC, KC, and ISED regulations (CYBLE-212006-01 and CYBLE-202007-01 only).  Refer to KBA213260 for RF certification test reports.
  • CYBLE-212006-EVAL, CYBLE-202007-EVAL, and CYBLE-202013-EVAL EZ-BLE™ PRoC™ Evaluation Boards to evaluate and develop applications for the CYBLE-2x20xx-x1 EZ-BLE PRoC Modules