CYBLE-022001-00: EZ-BLE™ Creator Module

General Description

The Cypress CYBLE-022001-00 is a fully certified and qualified module supporting Bluetooth® Low Energy wireless communication. The CYBLE-022001-00 is a turnkey solution and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PSoC 4 BLE.

The CYBLE-022001-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial communication protocols (I2C, UART, SPI) through its programmable architecture. The CYBLE-022001-00 includes a royalty-free Bluetooth LE stack compatible with Bluetooth 5.1 and provides up to 16 GPIOs in a small 10 × 10 × 1.80 mm package.

The CYBLE-022001-00 is a complete solution and an ideal fit for applications requiring Bluetooth LE wireless connectivity.

Module Description

• Module size: 10.0 mm ×10.0 mm × 1.80 mm (with shield)
• Bluetooth 5.1 single-mode module
• Industrial temperature range: –40 °C to +85 °C
• 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit multiply, operating at up to 48 MHz
• 128-KB flash memory
• 16-KB SRAM memory
• Watchdog timer with dedicated internal low-speed oscillator (ILO)
• Two-pin SWD for programming
• Up to 16 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output
• Certified to FCC, CE, MIC, KC, and ISED regulations. Refer to KBA97094 for RF certification test reports.
• Bluetooth SIG 5.1 qualified
  • QDID: 141250
  • Declaration ID: U048555
• CYBLE-022001-EVAL EZ-BLE™ Creator Evaluation Board to evaluate and develop applications on the EZ-BLE Creator Module

Power Consumption

• TX output power: –18 dbm to +3 dbm
• Received signal strength indicator (RSSI) with 1-dB resolution
• TX current consumption of 15.6 mA (radio only, 0 dbm)
• Low power mode support
  • Deep Sleep: 1.3 µA with watch crystal oscillator (WCO) on
  • Hibernate: 150 nA with SRAM retention 
  • Stop: 60 nA with XRES wakeup

Functional Capabilities

• Up to 15 capacitive sensors for buttons or sliders with best-in-class signal-to-noise ration (SNR) and liquid tolerance
• 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer
• Two serial communication blocks (SCBs) supporting I2C (master/slave), SPI (master/slave), or UART
• Four dedicated 16-bit timer, counter, or PWM blocks (TCPWMs)
• Programmable low voltage detect (LVD) from 1.8 V to 4.5 V
•  I²S master interface
• Bluetooth Low Energy protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles
• Switches between Central and Peripheral roles on-the-go
• Standard Bluetooth Low Energy profiles and services for interoperability
• Custom profile and service for specific use cases