You are here

Graphic LCD Interface (GraphicLCDIntf) | Cypress Semiconductor

Graphic LCD Interface (GraphicLCDIntf)

Last Updated: 
Sep 05, 2018
Version: 
1.80
Features Symbol Diagram
  • 8- or 16-bit interface to Graphic LCD Controller
  • Compatible with many graphic controller devices
  • Interfaces with SEGGER emWin graphics library
  • Performs read and write transactions
  • 2 to 255 cycles for read low pulse width
  • 1 to 255 cycles for read high pulse width
  • Implements typical i8080 interface 
Graphic LCD Interface
 

General Description

The Graphic LCD Interface (GraphicLCDIntf) Component provides the interface to a graphic LCD controller and driver device. These devices are commonly integrated into an LCD panel. The interface to these devices is commonly referred to as an i8080 interface. This is a reference to the historic parallel bus interface protocol of the Intel 8080 microprocessor.

This Component is designed to work with the SEGGER emWin graphics library. This library provides a full-featured set of graphics functions for drawing and rendering text and images. The emWin graphics library is available for the following devices: 

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.