You are here

Component Datasheets | Cypress Semiconductor

PSoC 4 Inductive Sensing (IndSense)

Features Symbol Diagram
  • Supports Inductive sensing up to frequencies of 3 MHz.
  • Supports auto-tuning algorithm for easy tuning and reliable operation.
  • Supports up to eight simultaneous Inductive sensing inputs
  • Contains an integrated graphical user interface for tuning, testing and debugging.
  • Sampling rate up to 10 ksps.

PSoC 6 Capacitive Sensing (CapSense®)

Features Symbol Diagram
  • Offers best-in-class signal-to-noise ratio (SNR)
  • Supports Self-Capacitance (CSD) and Mutual-Capacitance (CSX) sensing methods
  • Features SmartSense™ auto-tuning technology for CSD sensing to avoid complex manual tuning process
  • Supports various Widgets, such as Buttons, Matrix Buttons, Sliders, Touchpads, and Proximity Sensors

PSoC 4 Multiple Phenomena Sensing (Senzei®)

Features Symbol Diagram
  • Offers industry-leading CapSense® capacitive-sensing and MagSense™ inductive-sensing.
    • Supports CapSense self-capacitance (CSD) and mutual-capacitance (CSX) sensing methods.
    • Supports MagSense inductive-sensing (ISX), up to frequencies of 3 MHz.
  • Features SmartSense™ auto-tuning technology for CapSense capacitive-sensing that accelerates the design cycle.

PSoC 4 Programmable Gain Amplifier (PGA_P4)

Features Symbol Diagram
  • Eleven programmable gains between 1 and 32 in 3 dB steps
  • Gain and power levels may be changed during runtime
  • The internal feedback resistors saves up to two GPIOs
  • Buffer high impedance sensor signals
  • Amplify small signals to match ADC range
  • Ability to operate in deep sleep low power mode

USBFS Device (USBFS_DEV_PDL)

Features
Symbol Diagram
  • USB full-speed device framework
  • One bidirectional control endpoint and eight unidirectional data endpoints
  • Support for interrupt, control, bulk, and isochronous transfer types

SEGGER emWin Graphic Library (emWinGraphics)

Features
  • The package integrates emWin 8051 Graphic Library for PSoC3 and full-featured emWin Graphic Library v5.46 for PSoC 4 and PSoC 5LP.
  • The library can be used with the Keil_PK51, GCC and Keil MDK toolchains.
  • CompactColor_16, FlexColor, and BitPlains display drivers are available for PSoC 4 and PSoC 5LP.
 

General Description

Switched-Cap Filter

Features Symbol Diagram
  • 13-bit signed input data
    • Low pass
    • High pass
    • Band pass
    • Band stop
  • Continuous-time output
  • Automatic sample rate for best performance or set by user
  • Filter response graphs in frequency and time domains
  • Optional input to change the polarity of filter output

PSoC 4 Inductive Sensing (MagSense)

Features
  • Supports Inductive sensing up to frequencies of 3 MHz.
  • Supports auto-tuning algorithm for easy tuning and reliable operation.
  • Supports up to eight simultaneous Inductive sensing inputs.
  • Contains an integrated graphical user interface for tuning, testing and debugging.
  • Sampling rate up to 10 ksps.
 

General Description

PSoC ® Creator™ Component Datasheet Switched - Cap VDAC

Features Symbol Diagram
  • 13-bit signed input data
  • Monotonic to 11 bits
  • Up to two reference voltage terminals for flexible transfer functions
  • Buffered output can drive loads with up to 10 mA

Operational Amplifier (OpAmp_PDL)

Features Symbol Diagram
  • Follower or Opamp configuration
  • Rail-to-rail inputs
  • Direct output connection to pin (low resistance)
  • 1 mA or 10 mA output current drive
  • Internal connection for Follower configuration
  • Multiple power levels
  • Operates in Deep Sleep mode
 

Pages