You are here

CE222967 - Excelon™-Ultra QSPI F-RAM Access Using PSoC 6 MCU SMIF | Cypress Semiconductor

CE222967 - Excelon™-Ultra QSPI F-RAM Access Using PSoC 6 MCU SMIF

Last Updated: 
Jul 09, 2020

CE222967 provides a code example that implements the QSPI host controller on the PSoC 6 MCU device using the SMIF Component and demonstrates accessing different features of the QSPI F-RAM™. The result is displayed by driving the status LED (RGB), which turns green when the result is a pass, and turns red when the result is a fail. The code example also enables the UART interface to connect to a PC to monitor the result.

This example works with PSoC Creator. To run code examples in PSoC Creator, download and unzip the code example package, run PSoC Creator, go to File > Open > Project/Workspace, then browse to and select the .cywrk file. For documentation and collateral regarding PSoC Creator, please visit the PSoC Creator SW page to learn more. To see code examples available for PSoC Creator, go here.

This example may be available for ModusToolbox™ v2.x. To see code examples for ModusToolbox, go here. Use the Eclipse IDE for ModusToolbox New Application wizard to create the example. Refer to the Quick Start Guide, "Create New Application" chapter for details. You can also export the example to another IDE, such as VS Code, IAR, or μVision. Refer to the ModusToolbox User Guide “Export to IDEs” chapter.