AN84858 - PSoC®4 Programming Using an External Microcontroller (HSSP) | Cypress Semiconductor
AN84858 - PSoC®4 Programming Using an External Microcontroller (HSSP)
Last Updated:
Sep 17, 2018
Version:
*M
AN84858 shows you how to implement PSoC® 4 device programming with an external microcontroller by using modular C code. In this process, called Host Sourced Serial Programming (HSSP), the host microcontroller programs PSoC 4 through the serial wire debug (SWD) interface. The C code is written so that it can be ported to any microcontroller with minimal changes, speeding up HSSP application development for PSoC 4.
Introduction
PSoC 4 device programming refers specifically to the programming of the nonvolatile memory in PSoC 4 by using an external host programmer. The host can be the programmer supplied by Cypress (CY8CKIT-002 MiniProg3), a third-party programmer, or a custom programmer (e.g., an on-board microcontroller). This application note explains how to implement a host programmer to program a PSoC 4 device.
Project |
Device
|
Development Kit
CY8CKIT-xxx |
Compiler
|
|||||||
|
Architecture
|
Silicon
Revision |
V3.2 or higher |
V3.0 or
Lower |
Keil
|
GCC
|
MDK
|
RVDS
|
|||
|
AN84858.zip
|
PSoC 5LP
|
Prod
|
YES
|
NO
|
YES
|
YES
|
NO
|
YES
|
YES
|
YES
|
Refer to KBA93541 for a method to program a PSoC 4 using CY8CKIT-049.
Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.
Related Files
| File Title | Language | Size | Last Updated |
|---|---|---|---|
 AN84858 - PSoC®4 Programming Using an External Microcontroller (HSSP) |
English | 968.92 KB | 09/17/2018 |
 AN84858.zip |
English | 2.27 MB | 09/16/2018 |
|
AN84858 PSoC® 4 Programming Using an External Microcontroller (HSSP) (Chinese).pdf |
Chinese | 1.24 MB | 06/15/2017 |
|
AN84858 PSoC® 4 Programming Using an External Microcontroller (HSSP) ( Japanese).pdf |
Japanese | 979.97 KB | 08/01/2017 |