You are here

AN2397 - PSoC® 1 and CapSense® Controllers - CapSense Data Monitoring Tools | Cypress Semiconductor

AN2397 - PSoC® 1 and CapSense® Controllers - CapSense Data Monitoring Tools

Last Updated: 
Mar 02, 2021
Version: 
*L

AN2397 shows how to monitor data from any Cypress CapSense® controller using the I2C or UART interface. With the tools described in this application note, you can view and log real-time sensor data for CapSense tuning and debugging.

Introduction

During the CapSense design process, you will need to monitor CapSense sensor data, such as raw count, baseline, and difference count, for tuning and debugging.

This document helps you to select the proper tool for viewing and logging CapSense sensor data. The two supported communication interfaces are I2C and UART. You should be familiar with CapSense sensing technology before you read this document. If you would like more information about general CapSense theory and operation, see Getting Started with CapSense.

Dear valued customer,

Thank you for choosing our products. They come with all the know-how and passion that our engineers have put into it. As you probably already know, Cypress is now Infineon. This is a major step for our company, but also for the good of you. 

Reliability and business continuity are of utmost importance for us. Hence, we remain fully committed to honoring existing customer and distributor relationships. This includes offering the legacy Cypress product portfolio. We thank you very much for your trusting support.

For the full version of this message, please download the PDF version.

Translated documents are for reference only. We recommend that you refer to the English-language version of a document if you are engaged in development of a design.