You are here

AN60934 - Remote, High Brightness LED Control Using PowerPSoC(R) and Powerline Communication (PLC) | Cypress Semiconductor

AN60934 - Remote, High Brightness LED Control Using PowerPSoC(R) and Powerline Communication (PLC)

Last Updated: 
Apr 05, 2021
Version: 
*D
This is an Obsolete Application Note
The document AN60934 - Remote, High Brightness LED Control Using PowerPSoC(R) and Powerline Communication (PLC) has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.
AN60934 describes how to implement a lighting solution with Cypress’s PowerPSoC® High Brightness LED Controller and Cypress’s Powerline Communication (PLC) solution.

AN60934 describes how to implement a lighting solution with Cypress’s PowerPSoC® High Brightness LED Controller and Cypress’s Powerline Communication (PLC) solution. The attached code example controls up to four High Brightness (HB) LEDs based on the color information received from a PLC device (for example, CY8CPLC20). This code example uses the Master/Transmitter and Slave/Receiver auto-node discovery code example from the Application Note “PLC - LED Lighting Control using Powerline Communication - AN58717.”Powerline Block Diagram