You are here

AN5038 - Migrating from EZ-USB® HX2™ to EZ-USB HX2LP™ | Cypress Semiconductor

AN5038 - Migrating from EZ-USB® HX2™ to EZ-USB HX2LP™

Last Updated: 
May 28, 2020
Version: 
*F
This is an Obsolete Application Note
The document AN5038 - Migrating from EZ-USB® HX2™ to EZ-USB HX2LP™ has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.

AN5038 is intended to expedite the developer's learning curve regarding the migration of a CY7C65640A (EZ-USB® HX2™) design to use the CY7C65630 (HX2LP™) hub.

Introduction

The HX2LP family is next-generation USB high-speed hubs. This family of hubs includes a two-port hub (CY7C65620) with a single transaction translator (TT), and a 4-port hub with a single TT (CY7C65630). The HX2LP family reduces the power consumption of the HX2 while minimizing the effects on existing designs. This Application Note highlights the difference between the products, and aids the designer in migrating existing designs to the HX2LP family.