You are here

AN214849 - Airtime Queue Fairness | Cypress Semiconductor

AN214849 - Airtime Queue Fairness

Last Updated: 
Jul 06, 2020
Version: 
*C
This is an Obsolete Application Note
The document AN214849 - Airtime Queue Fairness has been marked as obsolete. The obsolete version of this application note is still available with the below description but may not be complete or valid any longer. If you have any questions or require support in regards to the below application note content, please click here and create a technical support case.
This document provides information on the Cypress airtime queue fairness (ATF) feature. The ATF feature was implemented to address the impact of slow data rate transfers on high data rate transfers. Data transfers that use a low PHY rate take longer to transmit over the air than those using a high PHY rate. Prior to ATF feature implementation, the fairness goal was equal frame numbers per transfer. This resulted in longer duration (slower rate) packets holding up shorter duration (higher rate) packets. When using TCP, this hold-up effect causes the round-trip time of high-rate transfers to go up significantly.