You are here

PWM Clock Sharing | Cypress Semiconductor

PWM Clock Sharing

Did you finish your homework? Well, here's an answer anyway. A couple of days ago I used a pair of TCPWM blocks to toggle the brightness of an LED at 1Hz. In that project I used an 8-bit clock divider as the source for the LED-driving PWM and a 16-bit divider for the slower toggling Timer-Counter. It worked just fine but it felt a little decadent to use two clock dividers when I am using a PSoC, which has the on-chip flexibility to use one divider for both TCPWM blocks. How to do that?

Well, the easy part is changing the clock source selection in the Timer-Counter using the Device Configurator. Open the project in ModusToolbox IDE and open the Configurator. In the SWAP_CTR block change the Clock Signal to "8 bit Divider 2 clk", which is marked in the drop-down as "USED" as a reminder that another resource is using that source (obviously... this is why we are choosing it!).

Choosing a USED PSoC clock divider

Next, there is a little mathematics, which is the English word for math. The frequency of the TCPWM output is a function of the peripheral clock (CLK_PERI) frequency, the 8 but divider value, the TCPWM prescaler (which I hinted at last time) and the period of the TCPWM counter. In pseudo-math (note that it is OK to call it math when it's "pseudo" - just because I am a snob does not mean I am not really lazy as well) it looks like this.

CLK_PERI
LED frequency =  ----------------------------
divider * prescaler * period

Some of these are known (or the pseudo-math becomes "guessing"). The LED toggling frequency needs to be 1Hz. The CLK_PERI is set to 72MHz in the Platform tab of the Device Configurator and let's leave that alone. For the others, the divider is a 8-bit value, the period is 16-bit, and the prescaler is 1, 2, 4, 8, 16, 32, 164 or 128. The trick we have to perform is to divide and prescale CLK_PERI such that the TCPWM period gives us 1Hz, preferably with a nice round number. Here is the rearranged formula.

divider * prescaler * period = 72000000

The 16-bit TCPWM has a maximum period of 65535, which means the clock must be divided by at least 1098.6, which cannot be done in a 8-bit divider. So we need to use a prescaler value of at least 8. Beyond that there are gabillions of combinations that satisfy the equation. After a little trial and error, well mostly error, I figured out that a divider of 225 works really nicely because it creates a frequency of 320kHz. Precaling that by 32 gives me a TCPWM frequency of 10kHz and a period of 10000 gives me a 1Hz output. Et voila!

Dividing and prescaling the PSoC clock frequency

Here is the set up for the Timer-Counter, with the prescaler and period set as above.

Setting the PSoC Timer-Counter period and prescaler

Note that the LED_PWM just has to toggle fast enough not to flicker so I set the period to 1000 and the compare values to 500 and 50 for the 50% and 5% intensity values.

I had quite a lot of fun doing this project. I think it nicely illustrates how flexible PSoC is and how wretched my mathematics skills are. I've attached a template that you can use to replicate the design - to use it, open the New Application dialog and "Import..." the modus.mk file to create a copy of the project.

Importing the project template into ModusToolbox IDE

Note: you must be logged into cypress.com to see the attachment (PWM_Swap.zip).

 

ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". CYPRESS SEMICONDUCTOR AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY CYPRESS SEMICONDUCTOR. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM CYPRESS SEMICONDUCTOR.

Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms and Conditions of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms and Conditions of this site. Cypress Semiconductor and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.