User Module Datasheet: USBFS Bootloader Data Sheet , BOOTLDRUSBFS
UPDATED
[4 Jul, 2008]
The USB bootloader supports a fully functional device reprogramming ability with built in error detection and an industry standard communication interface.
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Two-Pole Band Pass Filter Data Sheet, BPF2
UPDATED
[4 Jul, 2008]
The BPF2 User Module implements a general-purpose second order state variable, also called a biquad, band pass filter. The center frequency and Q (ratio of center frequency to bandwidth) are functions of the clock frequency and the ratios of the...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Comparator Data Sheet, CMP
UPDATED
[4 Jul, 2008]
The CMP User Module provides a comparison of two selectable inputs. Both inputs have the same set of possible connections to choose from which allows for selecting the polarity of the output.
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
2-Mbit and 8-Mbit nvSRAM photo
UPDATED
[3 Jul, 2008]
Cypress's 2-Mbit and 8-Mbit non-volatile static random access memories extend Cypress's nvSRAM portfolio from 16-Kbit to 8-Mbit. The new devices feature access times as low as 20 ns, infinite read, write and recall cycles, and 20-year data retention....
|
More Resources |
Non Volatile Memory |
None |
|
Avnet Spartan-3A PSoC Kit
UPDATED
[3 Jul, 2008]
PSoC Designer software Avnet Design Resource Center
|
Software and Drivers |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: WIRELESSUSBLS Radio Data Sheet, WIRELESSUSBLS
UPDATED
[3 Jul, 2008]
The WirelessUSB LS Radio User Module is a firmware interface to the WirelessUSB LS Radio hardware. The radio does not use any PSoC digital or analog blocks. The WirelessUSB LS Radio API provides functions callable from both C and assembly to start the...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: USBUART Device Data Sheet, USBUART
UPDATED
[3 Jul, 2008]
The USBUART User Module is a method of migrating an older project that uses an RS-232 serial cable to one that uses USB. The simplest way to migrate a device to USB is to emulate RS-232 over the USB bus. The primary advantage of this method is that PC...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: USBFS Device Data Sheet, USBFS
UPDATED
[3 Jul, 2008]
The USBFS User Module provides a USB full speed Chapter 9 compliant device framework. The user module provides a low level driver for the control endpoint that decodes and dispatches requests from the USB host. Additionally, this user module provides...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: UART Data Sheet, UART
UPDATED
[3 Jul, 2008]
The UART User Module is an 8-bit Universal Asynchronous Receiver Transmitter that supports duplex RS-232-compliant, data format serial communications over two wires. Received and transmitted data format includes a start bit, optional parity, and a...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Triple Input 8-Bit Incremental ADC Data Sheet, TriADC8
UPDATED
[3 Jul, 2008]
The TriADC8 is a triple input integrating ADC with 8-bits of resolution. It can be configured to remove unwanted high frequencies by optimizing the integrate time. Input voltage ranges, including rail-to-rail, may be measured by configuring the proper...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Triple Input 7- To 13-Bit Incremental ADC Data Sheet, TriADC
UPDATED
[3 Jul, 2008]
The TriADC is a triple input integrating ADC with an adjustable resolution between 7 and 13 bits. It can be configured to remove unwanted high frequencies by optimizing the integrate time. Input voltage ranges, including rail-to-rail, may be measured...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Stochastic Signal Density Modulation Data Sheet, SSDM
UPDATED
[3 Jul, 2008]
The Stochastic Signal Density Modulation (SSDM) user module provides the compare output of a SSDM hardware block to a row interconnect. The stochastic counter produces all codes in range 1..2n-1,but the codes are randomly ordered. The resolution is...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: SPI Slave Data Sheet, SPIs
UPDATED
[3 Jul, 2008]
The SPIS User Module is a Serial Peripheral Interconnect Slave. It performs full duplex synchronous 8-bit data transfers. SCLK phase, SCLK polarity, and LSB First can be specified to accommodate most SPI protocols. The SPIS PSoC block has selectable...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: Sleeptimer Data Sheet, SLEEPTIMER
UPDATED
[3 Jul, 2008]
The SleepTimer User Module provides basic timing functions without the use of valuable digital blocks. This user modules makes use of the standard sleep timer to create a variety of timing functions that are often useful in a project.
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
User Module Datasheet: SDCARD Data Sheet, SDCARD
UPDATED
[3 Jul, 2008]
The SDCard User Module allows you to access PC compatible files on six different flash card form factors without the need to know the "nuts and bolts" of either file access or the flash card interface. The SDCard User Module allows basic operation...
|
User Module Datasheets |
PSoC Mixed-Signal Array |
None |
|
|
|
Short Link
XML/RSS
multiple files