You are here

EZ-PD™ CCG5: Two-Port USB Type-C and Power Delivery | Cypress Semiconductor

EZ-PD™ CCG5: Two-Port USB Type-C and Power Delivery

EZ-PD™ CCG5 is Cypress’s two port USB Type-C and Power Delivery controller targeting Desktops, Notebooks and Docking Station. CCG5 integrates VBUS-to-CC short protection, VBUS-to-SBU short protection, 20V-VBUS regulator, high-voltage PFET gate drivers, SBU and USB HS mux, VBUS Over-Voltage and Over-Current Protection, and ESD protection.

CCG5 supports Downstream Facing Port (DFP), Upstream Facing Port (UFP), and Dual Role Port (DRP) and will fully support the Power Delivery 3.0 specification. CCG5 is a programmable solution with 128KB flash supporting fail-safe boot up and firmware upgrade.

Cypress has USB Type-C and Power Delivery reference designs readily available online for various applications which can be used to speed up design cycle.

EZ-PD™ CCG5 Product Features

  • USB Type-C and Power Delivery 3.0 supporting USB and Thunderbolt, DisplayPort Alternate Mode platforms
  • Integrated Digital Blocks
    • Two timers, counters and PWMs and up to 28 GPIOs
    • Four SCBs for configurable master/slave I2C, SPI or UART
  • Integrated Analog Blocks
    • Integrated high-voltage 20V-regulator
    • SBU analog mux, USB analog mux
    • VBUS-to-CC short protection
    • VBUS-to-SBU short protection
    • VCONN FETs
    • High-side current sense amplifier
    • Legacy charge-detect block (BC v1.2, Apple Charging)
    • High-voltage PFET gate drivers
    • VBUS discharge NFET
  • System-Level Fault Protection
    • Configurable VBUS over-voltage protection and over-current protection
    • VCONN over-current protection
    • ESD protection CC, D+/D- and VBUS Pins
  • Packages: 2-Port in 96-BGA (6x6 mm), 1-Port in 40-QFN (6x6 mm)
  1. Watch the Type-C 101 Video Series
  2. Download the CCG5 Datasheet
  3. Refer to CCGx FAQ page and Type-C Reference Design page
  4. Get your Schematics reviewed by the Cypress Applications Engineering Team using the Online Tech Support Case System

    USB Type-C Specification

    USB Type-C is the new USB-IF standard that solves several challenges faced by today's Type-A and Type-B cables and connectors. USB Type-C uses a slimmer connector (measuring only 2.4-mm in height) to allow for increasing miniaturization of consumer and industrial products. The specification allows for fully reversible plugs and enables transport of both USB signals and PCIe or DisplayPort signals on the same connector. The Type-C specification aslo increases the power delivery capability from 7.5 W to 100 W.

    USB 3.1 specification (including Type-C)

    USB Power Delivery

    The New USB Type-C Cable