You are here

Using UART in PSoC1 | Cypress Semiconductor

Support & Community

Using UART in PSoC1

Last Updated: January 25, 2012

How to implement a UART in PSoC1?


For the implementation of UART, two communication digital blocks are required. PSoC Designer provides an 8-bit UART UM with a set of APIs for data communication.


Attached document and project provides an example of how to configure UART for a particular baud rate. It also shows how to handle the transmission and reception of data via UART on both PC and device side.

File TitleLanguageFile SizeLast Updated
Download Using UART in PSoC1English335.98 KB01/24/12
Download Using UART in PSoC1English256.91 KB01/24/12
Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type