You are here

Title: PSoC Designer 5.0 and LVPrcSrv issue. | Cypress Semiconductor

Support & Community

Title: PSoC Designer 5.0 and LVPrcSrv issue.

Last Updated: December 29, 2011

System always hangs during the generate/build process in PSoC Designer 5.0. The system has a Webcam effects service from Logitech called "LVPrcSrv". If this service is stopped, PD5.0 works fine. If it is restarted, PD5.0 hangs.


According to one Logitech user's forum, this is a known problem with the LVPrcSrv software. This is not an issue with PD5.0. Since the LVPrcSrv software doesn't affect normal operation of the Webcam, the workaround is to set the service to manual. This way it will not conflict with PD5.0.

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type