You are here

Spread spectrum support with the CY2305 / Z9305 | Cypress Semiconductor

Support & Community

Spread spectrum support with the CY2305 / Z9305

Last Updated: November 22, 2013

I'm using the IMI SM530AYB as a spread spectrum clock source. This goes into a CY2305 (or Z9305) clock buffer. The data sheet for the Z9305 claims "Spread Spectrum Compatible" but this is not stated in the CY2305 datasheet. Will these two clock buffers properly lock on to the spread clock source and pass through the "spread"? Will they work properly up to the maximum of 10% spread?


The CY2305 and Z9305 are two different parts. Z9305 is obsolete now. An equivalent of the Z9305 would be the CY23S05. The CY2305 and CY23S05 are newer design parts. The only difference between the two would be the Spread Spectrum compatibility: CY2305 is Not Spread Spectrum compatible. CY23S05 is Spread Spectrum compatible with wider loop bandwidth. For your system, the CY23S05 is the choice. You can use a Time Domain Analyzer to check the profile of the spread of the input vs. the output. Or you can also use a Spectrum Analyzer to check as well.

Provide feedback on this article

Browse KB By Product

Browse KB by Type