You are here

Power sequence for PSoC3 and PSoC5 | Cypress Semiconductor

Support & Community

Power sequence for PSoC3 and PSoC5

Last Updated: November 29, 2010

Is there a power sequence required for different supplies i.e. Vddio, Vdda, Vddd etc in PSoC3 and PSoC5?


No there is no power sequence required. However, Vdda should be the highest supply in the system. So, as far as Vdda is applied before other supplies or at the same time when other supplies are on, it is fine.

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type