You are here

PN Codes | Cypress Semiconductor

Support & Community

PN Codes

Last Updated: December 24, 2011

What are PN codes and why are they used?


WirelessUSB systems encode their data within Pseudo Noise (PN) codes in DSSS mode. The main advantage is to increase the robustness and recoverability of the signal in the presence of interference. A simple explanation is that a single data bit from the application is represented by multiple bits when sent across the air, and decoded back into the original data bit on the receiving side. One result of using PN codes is that devices in a given network must agree to use a common PN code in order to understand one another. Another advantage of this is that it increases the co-location capabilities since devices can share the same channel if they use different PN codes.

Provide feedback on this article

Browse KB By Product

Browse KB by Type