Modifying the parameters of a previously added NAND Flash Part in NX2LP-Flex | Cypress Semiconductor
Support & Community
Modifying the parameters of a previously added NAND Flash Part in NX2LP-Flex
How to modify the parameters of a NAND Flash part previously added to NX2LP?
The files OtherParts.xml and NandParts.xml act as lookup tables to retrieve the information of a previously added NAND Flash parts. Both these files can be found in the path C:\Program Files\Cypress\NX2LP after the installation of the CY3686 NX2LP Development Kit. If the particular NAND Flash part is present in the file it shows up on the NX2LP programming utility. If a part is detected that cannot be found in the lookup table, the” Add New Nand Part” dialog box will pop-up. In order for the NAND parts to function properly with the NX2LP, it is crucial that the parameters in the dialog be accurately set. After entering the parameters from the datasheet correctly click on save.When the Save button is clicked, the parameters are saved in OtherParts.xml.
· Save the OtherParts.xml file after deleting the particular line and reset the NX2LP board.
· Open the NX2LP programming utility and the ” Add New Nand Part” dialog box will open since the Nand Part cannot be found in the lookup table.