Measurement of Current values from CSA block in PowerPSoC | Cypress Semiconductor
Support & Community
Measurement of Current values from CSA block in PowerPSoC
How do I measure the current strength values from the CSA blocks used in regulators inside PPSoC?
The current signal strength can be measured by routing using the AINX block.This AINX block provides the capability to route the output of a Current Sense Amplifier to the analog section in the PSoC core. This block takes the output of one of the four CSAs to the Switched Capacitance Block.
To measure the value place an ADC and route the signal from the column to it for further digitization. Please refer "CE62288 - PowerPSoC® - Measuring channel current using the Analog Input Multiplexer (AINX)" at http://www.cypress.com/?rID=49579 for details.