You are here

Input threshold of HX2 BUSPOWER pin | Cypress Semiconductor

Support & Community

Input threshold of HX2 BUSPOWER pin

Last Updated: June 15, 2011

What is the input threshold of the HX2 BUSPOWER pin?


The input threshold of BUSPOWER pin is about 1.5 V, so when connected to VBUS or any input exceeding the threshold will result in driving the pull up on D+, signalling a connect event. When BUSPOWER pin is connected to 3.3 V, it should work as well.!>

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type