You are here

Generating PCI Signals for the CY7C68013 FX2 | Cypress Semiconductor

Support & Community

Generating PCI Signals for the CY7C68013 FX2

Last Updated: April 03, 2011

Can the FX2 generate PCI-type signals by writing appropriate firmware to interface with a graphics controller?



In order to design this interface you will need a PCI_DP bridge solution to interface with the PCI device and the FX2. We recommend you look at our PCI interface controller . The CY7C09449PV is one of the PCI interface controllers in the Cypress Semiconductor PCI-DP family. The CY7C09449PV provides a PCI master/target interface with direct connections to many popular microprocessors. It provides 128 Kb of dual-port SRAM that is used as shared memory.

There is an application note that describes an electrical connection between the Cypress CY7C09449PV PCI-DP, (a 128K bit Dual-Port SRAM with PCI Controller), and the Texas Instruments TMS320LC31 digital signal processor. It can be found here.



Provide feedback on this article

Browse KB By Product

Browse KB by Type