You are here

Flow Control Lines in the CY4601 USB to Serial reference design | Cypress Semiconductor

Support & Community

Flow Control Lines in the CY4601 USB to Serial reference design

Last Updated: December 29, 2011

How are the flow control lines defined in the CY4601 USB to Serial reference design?


There are two common uses for the RTS and CTS flow control signals.  The first provides a full handshake with the two signals such that the  DTE sends RTS requesting to send data, and DCE responds with CTS signaling it is ready and is excepting to receive data.

However the alternative definition defined in the latest version of TIA/EIA-232 has been in popular use for quite a while.  In this definition each device uses its output independently to let the other device know when it is okay to send data.

CTS still indicates whether the DCE is ready to receive data or not.  But now RTS is redefined as the DTE's Ready for receiving.  Each device checks  the opposite ends's signal before transmitting.

This second definition is what is implemented in the USB to Serial reference design.  This allows proper flow control signaling for both a DTE to DCE system, or a DTE to DTE system (with Null Modem).

Provide feedback on this article

Browse KB By Product

Browse KB by Type