Diode temperature measurement using CY8CKIT-025 | Cypress Semiconductor
Support & Community
Diode temperature measurement using CY8CKIT-025
Diode temperature measurement in my CY8CKIT-025 shows the correct temperature only when both the diodes are installed. Why?
Due to a lapse at the manufacturing, the base and collector of the transistors that are shipped with the kit are not soldered as specified in the section 3.4 of the User Guide. Please solder the base and collector terminals of the transistors as explained in the kit User guide to use the diodes for temperature measurement. Otherwise, you have to install both the diodes (at least the emitter short wires (J8 3-4, J8 7-8) for the diode temperature to be right. When you install both diodes, the emitter short wire of one diode shorts the base and collector of the other diode.