You are here

Differential Amplifier in PSoC 3/5 | Cypress Semiconductor

Support & Community

Differential Amplifier in PSoC 3/5

Last Updated: September 12, 2011

How do I build a differential amplifier in PSoC 3/5?


PSoC3 ADC by itself is a differential amplifier ADC. The Delta Sigma ADC has a differential amplifier front-end.  This differential amplifier feeds its output to the ADC’s differential inputs. The differential amplifier front-end can have a maximum gain of 8. The differential ADC can have a maximum gain of 16. A total gain of 128 can be implemented.

If gain greater than 128 is required, two PGA’s can be used  back to back as shown in the figure below and then cascaded to the ADC along with its front-end buffers.  If a gain of 256  is required, configure both PGAs for a gain of 2 and cascade it to the differential ADC/buffer with a gain of 128.


 Please refer to the Application Note on Instrumentation Amplifier in PSoC 3/5 (AN60319)

Provide feedback on this article

Browse KB By Product

Browse KB by Type