You are here

CyConsole Re-connect Device control | Cypress Semiconductor

Support & Community

CyConsole Re-connect Device control

Last Updated: August 29, 2011

In Windows 2000, pressing the Re-connect Device control on CyConsole, the device is removed from CyConsole but does not return. Windows Device Manager still shows the device as functioning but CyConsole does not see the device again until device power is cycled. Does the Re-connect Device control work?


This control uses the ReConnect() call from the CyAPI.lib. This call causes the currently open USB device to be logically disconnected from the USB bus and re-enumerated.  This control was not working properly in Windows 2000, the latest version of CyConsole does not have this problem. It is available for download through SuiteUSB SDK.

Provide feedback on this article

Browse KB By Product

Browse KB by Type