You are here

CY2XF23 Programming Tools | Cypress Semiconductor

Support & Community

CY2XF23 Programming Tools

Last Updated: May 27, 2014

What hardware and software is required to program a CY2XF23?

The required programming tools are as follows:
Hardware –
CY3675-CLKMAKER1 CyClockMaker Clock Programming Kit. This programmer connects to a USB port on your computer.
CY3675-LCC6A Clock Socket Adapter. The adapter plugs onto the CY3675-CLKMAKER1 board described above, and needs to be purchased separately since it is not included in the kit.
Alternatively, you can use programmers from qualified vendors such as BP Microsystems. We have a General Purpose Clocks Third-Party Programmer List available on our website.
You also have an option to contact your

Local Sales Representatives or Distributor Channel for programming.

Software –
CyClockWizard. This software is used to enter the user requirements and generate a JEDEC format programming file.  It is also used to program the CY2XF23 when the CY3675 programmer is connected to your computer.

Documentation –


Ordering –


Local Sales Representatives. A list to select from your local sales person is available on our Website with their contact details. Following the link just provided you need to select your country name under “Location” and local area / state under “Area” dropdowns.

We have the convenience of our Online Cypress Store.
If the volume is large enough, you can have Factory Programmed configurations after contacting your

Local Sales Representatives.

Provide feedback on this article

Browse KB By Product

Browse KB by Type