You are here

CPLD checksum | Cypress Semiconductor

Support & Community

CPLD checksum

Last Updated: January 26, 2012

What is meant by CPLD checksum and what does a checksum error indicate?


 Checksum is a value calculated, by the programmer, from the data stream used to program the device. There is no specific checksum for a device, as this value is computed by the programmer from the code used to program the CPLD. Therefore, it will depend on the software algorithm used by the programmer. The checksum will change once the code is modified. This stored checksum value is compared to the one computed when the data is read back from the programmed device. If the two do not match, a checksum error is reported idicating that  there was a programming error.

Please be noted our entire Cypress CPLD product are Obsolete and not recommended for new design and development. For more information on CPLD product, please visit our webpage:

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type