You are here

Configuring the USB serial number in EZ-USB (AN21xx/FX/FX1/FX2/FX2LP) | Cypress Semiconductor

Support & Community

Configuring the USB serial number in EZ-USB (AN21xx/FX/FX1/FX2/FX2LP)

Last Updated: September 13, 2011

How do we configure the USB serial number in the CY7C68013A?


If you want to add a serial number to your descriptor file then you will need to assign a string index for the serial number field in the descriptor. Then you have to modify the string descriptor with that index into a serial number as shown below:

Consider the descriptor below in the dscr.a51 (in the framework code provided for keil uVision environment this is the file that stores the descriptors) file as the device descriptor.

db DSCR_DEVICE_LEN ;; Descriptor length
db DSCR_DEVICE ;; Decriptor type
dw 0002H ;; Specification Version (BCD)
db 00H ;; Device class
db 00H ;; Device sub-class
db 00H ;; Device sub-sub-class
db 64 ;; Maximum packet size
dw 4705H ;; Vendor ID
dw 0210H ;; Product ID (Sample Device)
dw 0000H ;; Product version ID
db 1 ;; Manufacturer string index
db 2 ;; Product string index
db 3 ;; Serial number string index
db 1 ;; Number of configurations

Following is the string descriptor if the serial number is 12345
db StringDscr3End-StringDscr3 ;; Descriptor length
db '1',00
db '2',00
db '3',00
db '4',00
db '5',00

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type