You are here

Configuring AN2720 (EZ-Link) | Cypress Semiconductor

Support & Community

Configuring AN2720 (EZ-Link)

Last Updated: March 15, 2010

Question: I understand the VID/PID/DID of AN2720 (EZ-Link) is configurable through EEPROM. What about the other fields i.e. bDeviceClass, bDeviceSubClass etc. Are they configurable?

Response: Only the VID/PID/DID are configurable through EEPROM. The other fields are not configurable.

Provide feedback on this article

Browse KB By Product

Browse KB by Type