Conditions for the Active Current in PSoC 3 data sheet | Cypress Semiconductor
Support & Community
Conditions for the Active Current in PSoC 3 data sheet
In the PSoC 3 Datasheet, the Active current is mentioned as 1mA (typical). What are the conditions based on which this Current value is calculated?
The conditions are:
1. IMO 6 MHz, CPU 6 MHz, all peripherals disabled.
2. Specified at 25 C and is an average statistical value.
3. No boost inductive pumping, Vddd=Vio=3.3V
4. PLL disabled, all clocks generated from IMO