You are here

In-circuit programming of M-8 chips | Cypress Semiconductor

Support & Community

In-circuit programming of M-8 chips

Last Updated: October 02, 2011

How to program M8 Chips in-circuit?


We recommend that the M8 chips be programmed prior to being soldered on the board. This negates the possibility of other components on the board affecting the signals going into the ROM. If the customers must program the M8 chips in circuit, they'll need to make sure that the discrete components on the board will not have any impact on the programming signals that come from the programmer.

Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type