You are here

Chip Select CS# Pin of SX2 | Cypress Semiconductor

Support & Community

Chip Select CS# Pin of SX2

Last Updated: June 09, 2011

What is the functionality of CS# of SX2 (CY7C68001)?


CS# is an alternate function of FLAGD pin in SX2. Bit 1(FLAGD/CS#) of the IFCONFIG register controls the function of the FLAGD/CS# pin. When FLAGD/CS# = 0 (default), the pin operates as a slave chip select (CS#). If FLAGD/CS# = 1, the pin operates as FLAGD. If this bit is set to 0(CS# mode) and CS# is de-asserted, the SX2 will ignore all Slave FIFO control signals (SLWR, SLRD/SLOE, PKTEND) and tri-state the data bus. Only the local bus is affected. SLCS can be tied to low all the time if FIFO data bus is not shared with any other external peripheral is not needed.


Knowledge Base Tags: 

Provide feedback on this article

Browse KB By Product

Browse KB by Type